Electricity and lighting have become integral parts of everyday life. If you’ve ever experienced a power outage or a flood, then you know how chaotic it can be when these two things are taken away. To enhance the quality of life during these stressful situations, you should prepare your home with a set of LED floodlights.
Floodlights are lights that shoot out high-intensity beams of bright lights towards whatever they’re aiming at. They’re mostly used to light up outdoor sports fields, but nowadays you can find them in private property illuminating garages and warehouses.
Why use LEDs?
Today, you can find Led lights anywhere – from street lamps to computers and even installed in furniture. The main reason for using LEDs is they don’t produce any heat at all, making them safer for use indoors and around the home.
If you’re still unsure whether to make the switch to LED lights, then consider their service life. The average LED light bulb can continue shining its bright light for between 50,000 and 80,000 hours. This is equivalent to providing 22 years of light if the bulb is on for a maximum of 10 hours a night. Compare that to a halogen bulb that dies after only 4 to 8 months of use.
And if that’s still not enough to convince you to make the switch from halogen to LEDs then maybe this will: when comparing LED bulbs to equivalent halogens, an LED will use less than 80 to 90 percent of the energy required to keep a halogen bulb on for the same duration. During the long night hours where we don’t know when our LED flood lights will activate or whether they’ll stay on all night, power consumption can mean a heck of a lot in terms of dollars and cents.
Outdoor LED Flood Light Fixtures Buying Guide
Finding the right LED flood light for your home or place of business requires knowing what these fixtures come with. In this section, we’ll go over the most crucial factors you should consider when shopping for LED flood lights.
The brightness of a bulb is measured in lumens. The higher the lumen rating of a light bulb, the brighter the light will shine. Flood lights typically come with bulbs with between 700 and 20,000 lumens, but if you get LED lights, you can go brighter.
You’ll want to shine a brighter light on larger areas of your home. Here’s a quick guide to determine how bright a flood light you need for certain places.
• Patios – 500 lumens
• Less than 100 square feet – 1,000 to 2,000 lumens
• 160 square feet – 1,500 to 2,000 lumens
• 500 square feet – 2,000 to 2,500 lumens
• More than 1,000 square feet – 10,000 to 20,000+ lumens
The system used to turn the lights on and off on a flood light is more sophisticated than it was 20 years ago. The traditional way is by manually flipping the ON/OFF switch. The problem is when you forget to turn the lights on or leave them on for extended periods when out of town, you could end up spending more than you’d originally hoped on electricity. Thankfully, LED lights are relatively cheap to use and purchase, but nobody appreciates wasting electricity.
The more mode way of activating and deactivating flood lights is with motion sensors. Motion detectors will activate the floodlights when it detects someone or something passing inside the sensors’ range. This is a good system if you’re trying to scare away raccoons or potential thieves from attempting to break in your home, especially if you’re not around or fast asleep, but the floodlights are always on the OFF mode when the sensors don’t detect anything.
If you want your flood light fixtures to remain on during the night and turn off when the sun rises, the check out “Dusk to Dawn” floodlights. These lights come with sensors that detect sunlight. When the sun falls, these lights automatically activate until the next morning when the sun rises.
Ultimately, choosing one of these three systems depends on your own preference, but if you’re more focused on cutting electricity costs, the “Dusk to Dawn” system is, by far, the most cost-efficient.
The angle of a flood light’s beams is measured in degrees. The most appropriate beam angle would be around 120°, but if you need to illuminate a wider area, then you may need to get a floodlight that can be redirected at a wider angle.
If you prefer flood lights with automatic activating systems, then pay attention to the angle of the sensors. There are two detection angles for you to consider. The first is a standard 180° sensory range which triggers the floodlights to turn on when anything passes directly in front of the sensors. The second is an anti-creep 270° sensory range which can also detect movement on both sides of the sensor.
If a flood light is waterproof or water resistant, then leaving it all year long won’t be an issue. Floodlights that are prone to becoming damaged when exposed to rain or snow need to be taken indoors which is more of a pain in the neck than anything else. Make sure that the flood light has at least an IP65 protection rating which ensures immunity against rain and snow.
Keeping the exterior of your home to ward off thieves and raccoons can be a pain in the neck and other regions if you don’t have flood lights. The best bulb to use is LED which shine brighter, last longer, and cost less than traditional heat-producing halogen bulbs. If you’re shopping for a flood light for your home or business, there are a few things to consider, such as the brightness of the LED bulb, the total area that you want to illuminate, the activating system of the floodlights, the angle of the light and sensors, and whether the flood lights are waterproof.